Chair Rail Moulding 4-3/8" - 1

This ornate chair rail/symmetrical casing moulding 4-3/8" - 1 measures 4.375" wide by .687" thickness, the pattern can be milled from four quarter lumber. The profile is comprised of a shallow 3-5/16" radius arc in the center, flanked by a 1/8" wide by 3/16" deep sunk fillet that steps upward to a small ogee with a small vertical line, joined to a 27/64" wide raised fillet with a one quarter inch radius cove on each side edge of the pattern. Explore our backout category for a relief cut for the bottom of this detail, we’re confident you will find a suitable design to suit your needs.

Our high precision acrylic templates and knives include the required draft angles to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own a Weinig, Wadkin, Leadermac, SCM, Diehl, Kentwood, Shop Fox or Williams & Hussey moulder, our cutters will mill flawlessly on them all.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 4.375" / Depth of Cut = .315" (top knives) & .062" (bottom cutters.)