Crown 4-9/16"- 11

This appealing 4-9/16" - 11crown mould measures 4.562" wide by .750" thickness, allowing the pattern to be machined from four-quarter lumber. The elegant profile is composed of a 25/64" quarter round bead with a 13/64" vertical line in the upper portion, connected to a 2-17/64" concave semicircle tangent off of a 15/32" radius arc in the center, attached to another 13/64" vertical line segment with a 9/16" cove and a 7/32" horizontal line at the bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 3-7/32" tall and wide.

Would you like to reduce the time it takes to set up the moulder for a milling production run? Perhaps calibrating the machine's spindles axially and radially will substantially decrease setup time while simultaneously increasing production.