Cabinet Door Moulding 2-13/16"

This cabinet door rail moulding 2-13/16" measures 2.812" in width by .781" in thickness, necessitating 3-1/16" wide blanks of four-quarter lumber for milling on a commercial moulder. The beautiful detail comprises a shallow two-tangent radius ogee with a 3/64" eased upper edge on the top left. It connects to a 13/16" flat section transitioning into a 7/16" convex arc tangent to a 7/16" cove forming the scotia in the center. The scooped-out area joins two tiny beads divided by a small sunk fillet and a 7/32" cove with a 3/32" rolled edge above the dado for the panel.

For knife quoting purposes, click on the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart and place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 2.813" / Depth of Cut = .476" (top knives).