Raised Panel Moulding 1-1/4"

This attractive raised panel moulding 1-1/4” measures .750” thickness, allowing the detail to be machined out of four-quarter lumber; the width can be milled to any desired size within the parameters of the machinery used to cut the pattern. The decorative profile comprises a 1/4” wide by 43/64” tall, slightly tapered tongue on the bottom right, connected to a 17/32” concave semicircular arc in the center, attached to a 1/8” vertical line segment on the top. We offer another profile for a 5/8” thickness panel with similar design characteristics for your review and consideration, panel moulding 1.250” - 1.

Before beginning knife grinding procedures, please read our article on knife cutting circles to see if you can safely mill this pattern on your machinery, this pattern will not be able to be milled on certain models of molders.

For moulding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = .750" / Depth of Cut = 1.250" (right blades).