Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Backout/Relief Cut Moulding 4" - 3

Backout/Relief Cut Moulding 4" - 3

This Backout/Relief Cut Moulding Knife Design 4" - 3 measures 4.000" wide, with a .125" depth of cut on the bottom horizontal moulding cutter. This fluted relief cut profile is intended to be utilized on the backside of many of our smaller sized crown and cove mouldings. These concave plows will help keep the crown or cove profile from cupping, and becoming out of square after the milling process.

The profile is comprised of two 13/64" radius flutes, separated by a 1-5/8" wide fillet in the center, a 13/16" wide fillet on the inside edge, and a 1-1/16" wide fillet on the outside edge of the pattern.

To help you better understand why backout or relief cuts are used in moulding design, please refer to our helpful article titled Moulding Backout Relief Cuts. After reading this commentary, we trust you will find the appropriate relief cut design for your customized moulding pattern.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.