Base Cap Moulding Profiles

Search Moulding Catalog by Category and Size (inches)

/
/
A base cap is a decorative wood profile applied to the top of a piece of baseboard to create an attractive elegant look. Base cap designs generally cost less because they are smaller in size and stacked upon a piece of surfaced four sides lumber (S4S). Lumber with profiles milled into them generally have higher cost because the need for a set of custom knives for that specific shape, the larger the profile, the higher the cost. A piece of any sized surfaced four-sided lumber (S4S) can be customized in so many ways the possibilities are endless.

We have over three hundred and fifty base cap designs, eleven hundred and eighty applied mouldings, and over six hundred and fifty panel mouldings for your consideration and use at the top of a piece of square S4S material. Don’t forget dressing up the bottom of the baseboard with one of our fancy base shoe profiles, with your creative mind and our vast selection of some of the finest enhancing designs available, we are positive you will find the right combination of profiles to complement the architectural décor of your astonishing home or office building.

All these base cap profiles are categorized by the width of the profile, if you're searching for a specific size base cap, enter identical sizes in both the minimum and maximum boxes provided above, if you would like to review them all, leave the search parameters blank or empty, we trust you will find that special base cap pattern for your current building project, if not, send us a sketch, we would be happy to design and grind a set of custom profile knives specifically for your needs.

355  Base Cap Profiles Found
Base Cap Moulding 1/2"

bc-p500
Size: 0.5
Profile Drawing
view full scale & description
Base Cap Moulding 3/4"

bc-p750
Size: 0.75
Profile Drawing
view full scale & description
Base Cap 3/4" - 1

bc-p750-1
Size: 0.75
Profile Drawing
view full scale & description
Base Cap Moulding 3/4" - 2

bc-p750-2
Size: 0.75
Profile Drawing
view full scale & description
Base Cap Moulding  Profile 3/4" - 3

bc-p750-3
Size: 0.75
Profile Drawing
view full scale & description
WM 172 Base Cap Moulding 3/4" - 4

bc-p750-4
Size: 0.75
Profile Drawing
view full scale & description
Base Cap Moulding 13/16"

bc-p813
Size: 0.813
Profile Drawing
view full scale & description
Base Cap Moulding 13/16" - 1

bc-p813-1
Size: 0.813
Profile Drawing
view full scale & description
Base Cap Moulding 7/8"

bc-p875
Size: 0.875
Profile Drawing
view full scale & description
Base Cap Moulding 7/8" - 1

bc-p875-1
Size: 0.875
Profile Drawing
view full scale & description
Base Cap/ Shoe Moulding 7/8" - 2

bc-p875-2
Size: 0.875
Profile Drawing
view full scale & description
Base Cap Moulding 7/8" - 3

bc-p875-3
Size: 0.875
Profile Drawing
view full scale & description
Contemporary Base Cap Moulding Profile 7/8" - 4

bc-p875-4
Size: 0.875
Profile Drawing
view full scale & description
Base Cap Moulding 15/16"

bc-p937
Size: 0.937
Profile Drawing
view full scale & description
Base Cap Moulding 1"

bc-1p000
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 1

bc-1p000-1
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding 1" - 2

bc-1p000-2
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding 1" - 3

bc-1p000-3
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 4

bc-1p000-4
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 5

bc-1p000-5
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 6

bc-1p000-6
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 7

bc-1p000-7
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 8

bc-1p000-8
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1" - 9

bc-1p000-9
Size: 1.0
Profile Drawing
view full scale & description
Base Cap Moulding 1-1/32"

bc-1p031
Size: 1.031
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-1/16"

bc-1p062
Size: 1.062
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-1/16" - 1

bc-1p062-1
Size: 1.062
Profile Drawing
view full scale & description
WM 164 Base Cap Moulding 1-1/8"

bc-1p125
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding 1-1/8" – 1

bc-1p125-1
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding 1-1/8" - 2

bc-1p125-2
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding 1-1/8" - 3

bc-1p125-3
Size: 1.125
Profile Drawing
view full scale & description
WM 167 Base Cap Moulding 1-1/8" - 4

bc-1p125-4
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding 1-1/8" - 5

bc-1p125-5
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-1/8" - 6

bc-1p125-6
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding Design 1-1/8" - 7

bc-1p125-7
Size: 1.125
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-5/32"

bc-1p156
Size: 1.156
Profile Drawing
view full scale & description
1-3/16" Base Cap Moulding Profile

bc-1p188
Size: 1.188
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-3/16" - 1

bc-1p188-1
Size: 1.188
Profile Drawing
view full scale & description
Base Cap Moulding Profile 1-3/16" - 2

bc-1p188-2
Size: 1.188
Profile Drawing
view full scale & description
Base Cap Moulding 1-3/16" - 3

bc-1p188-3
Size: 1.188
Profile Drawing
view full scale & description