Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Backout/Relief Cut Moulding 6" - 1

Backout/Relief Cut Moulding 6" - 1

This Backout/Relief Cut Moulding 6" - 1 measures 6.000" wide, with a .063" depth of cut on the bottom horizontal moulding cutters. This profile is designed to be utilized on hundreds of our standard sized baseboard mouldings.

The offset profile is comprised of a 4" wide, by 1/16" deep plow with forty-five degree chamfers, they transition into a 3/4" wide horizontal fillet on the inside edge of the design, and a 1-1/4" wide fillet on the outside edge of the detail. This area of the profile is generally the bottom side of the baseboard, it will provide enough space for nailing the moulding during installation, while reducing splitting that may occur from nailing the baseboard thru the void area on the back side of the pattern. The maximum width this backout could mill is 4-1/4" wide when the horizontal moulder spindle is positioned at .000" axially.

If you have any questions or concerns about knife grinding procedures for any of our moulding designs, please contact us we would be honored to assist you.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.