This Backout/Relief Cut Moulding 7" - 2 measures 7.000" wide, with a .063" depth of cut on the bottom horizontal set of blades. This profile can be used on many of our interior & exterior door jambs, tongue & groove flooring and siding designs, and many of our larger width crown mouldings.
The profile layout is comprised of four 3/4" wide by 1/16" deep plows flanked by forty-five degree bevels, with three 5/8" wide fillets in the center, and 1-1/16" wide straight fillets on each side edge of the pattern. The maximum width this knife can mill is 7-3/4" wide when the bottom moulder spindle positioned at .000" axially.
Please review some of our helpful moulder and knife grinding articles, they will assist you in many aspects of moulder set up and knife grinding procedures. These commentaries were written to help you be more familiar with the machinery, while making your job a little easier in the process.
Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%