This Single Plow Backout/Relief Cut Moulding 7-3/4" measures 7.750" wide, with a .094" depth of cut on the bottom moulding knives. The profile can be utilized on many of our stylish and creative baseboard, casing, or chair rail mouldings.
The profile is comprised of a 4-1/4" wide by 3/32" deep off-center plow in the middle, attached to a 1/1/4" wide straight line on one side of the pattern, and a 2" wide horizontal line on the opposite side. The maximum width this backout/relief cut could mill is 8-1/2" wide when the bottom spindle is positioned at .000" axially.
Our purple colored ceramic blend grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel moulding cutters in a minimal amount of time. Read our article on the importance of having the profile knife grinder perfectly level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when grinding moulding knives.
Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%