Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Two Plow Backout/Relief Cut Moulding 8" - 2

Two Plow Backout/Relief Cut Moulding 8" - 2

This Two Plow Backout/Relief Cut Moulding 8" - 2 measures 8.000" wide, with a .062" depth of cut on the bottom horizontal moulding knives. The double plow design can be utilized on many of our larger width baseboard mouldings.

The asymmetrical profile is comprised a 1-1/2" wide fillet on the left side of the image, connected to a 1-1/2" wide by 1/16" deep plow flanked by forty-five degree chamfers, attached to a 1-1/4" wide flat line in the center, joined to a 2" wide by 1/16" deep plow, with a 1-3/4" wide flat line on the right side of the profile. The maximum width these knives can mill is 8-3/4" wide, with the bottom horizontal moulder spindle positioned at .000" axially.

Would you like to reduce the amount of time it takes to set up the moulder for a milling production run? Perhaps calibrating the moulder spindles axially and radially will substantially decrease setup time while simultaneously increasing production.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.