Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Base Cap Moulding 1-1/16"

Base Cap Moulding 1-1/16"

This stylish base cap moulding 1-1/16" measures 1.062" wide by .625" thickness. The beautiful pattern is applied to the edge of a piece of S4S lumber (surfaced four sides) to enhance the overall look of the baseboard at minimal cost. The profile is comprised of a 3/32" wide horizontal line at 7/16" thickness, connected to a two tangent radius cyma reversa with a 3/32" tall vertical line and a 3/16" quarter round circle on the thin side of the design.

Would you like to reduce the amount of time it takes to set up the moulder for a milling production run? Perhaps calibrating the moulder spindles axially and radially will substantially decrease setup time while simultaneously increasing production.

Caution; the cutters will come within .020" of the moulder bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.062" / Depth of Cut = .625" (top knives.)

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.