Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Base Shoe Moulding 7/8" - 5

Base Shoe Moulding 7/8" - 5

This attractive base shoe moulding 7/8" - 5 measures .875" wide by .500" thickness. The functional profile is used where the bottom of the base molding touches the top of hardwood flooring, it will hide any gaps that may have occurred during the installation process as well as adding a beautiful transitional molding between the wall and flooring, the piece is applied to the base detail not the flooring. The pattern consists of a 1/4" wide horizontal line tangent off of a 1/2" radius arc with a 5/32" fillet leaving a 3/16" thickness dimension on the thin side of the design.

Utilize fall off rips of lumber while doubling production in half the amount of time with this unique split two custom base shoe profile. Caution; the cutters will come within .015" of the moulder bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For safety concerns we strongly suggest an anti-kickback device be installed on the machinery before attempting any milling procedures that involve splitting lumber into multiple pieces.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.906" / Depth of Cut = .505" (top knives.)

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.