Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Base Moulding 6-1/4" - 8

Base Moulding 6-1/4" - 8

This definitive base moulding 6-1/4" - 8 measures 6.250" wide by .625" thickness. The classy profile is comprised of a 2-1/2" wide straight line connected to two recessed beads with 3/16" radius edges, attached to a small horizontal line with a 7/16" eased edge and a 3/16" wide fillet that transitions into an elongated two tangent radius cyma recta, joined to a 7/32" wide horizontal line with a 23/64" cove at the top of the design. We offer a similar pattern with an ogee at the top instead of the cove for your review and consideration, baseboard 6.250" - 3. You may want to browse our backout category for a suitable relief cut for this detail, we have a few options to select from.

Architects, interior designers, lumber mills, and manufacturers have been utilizing our vast variety of creative designs for years, we trust you will find that special profile to enhance the architectural style of your client's home. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 6.250" / Depth of Cut = .428" (top knives) & .062" (bottom cutters.)

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.