Moulding Knives by Mirror Reflections

Moulding Knives
by Mirror Reflections
(801)451-5987

Search Our Moulding Knives Catalog by Category and Size

*Enter desired search sizes - use whole numbers & decimals

32 Degree Back Bevel Cutter

32 Degree Back Bevel Cutter

32 Degree Back Bevel Cutter

This 32 degree back bevel cutter is designed to cut a thirty degree undercut on the right vertical cutter head on a industrial moulder while milling a piece of crown, cove or bed moulding. These knives create only half the determining factor of the final height and projection of any of the above mentioned profiles when installed, the other half of the equation is generally a degree that combined equals ninety.

On this back cut layout in the image above the maximum depth of cut is .445", the maximum height of cut is set at .712". Every crown, cove or bed pattern we design have height numbers near the degree of angle on the layout paperwork we supply. That number must be smaller than the height number above, in this example .712" for this knife to be able to cut the entire height of the bevel while milling, if not please select a larger size height bevel of the same degree. We intentionally design all our crown, cove and bed moldings with forty-five degree bevels and under to be milled on the right vertical cutter head, and, all forty-five degree and higher back bevels be milled on the left vertical cutter head. Our custom design practices will save you thousands of dollars in manufacturing cost over the years.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = 1.625" / Depth of Cut = .445" (right blades).

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file” , please send $11.00 to PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.
© Copyright 1997 - 2023 Mirror Reflections Inc. All Rights Reserved.
Superior Quality Moulding Knives, Profile Templates & Tooling Since1997
Custom made in the USAMoulding Knives Made in the USA

Moulding Knives by Mirror Reflections

1588 South 250 East | Kaysville, Utah 84037

Phone/Fax: 801-451-5987 

Moulding Catalog Updated Sunday, October 1, 2023

© Copyright 1997 - 2023 Mirror Reflections Inc. All Rights Reserved.