Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

45 Degree Back Bevel Cutter

45 Degree Back Bevel Cutter

These 45 degree back bevel cutters are designed to mill a forty-five-degree chamfer on the backside on any of our bed mould, cove or crown molding. These knives create half the determining factor of the final height and projection of these types profiles listed above when installed. The other half of the equation for back cuts on these styles of designs will be a degree that combined equals ninety or slightly more, depending on the manufacturer's tolerances. On this knife layout the maximum depth of cut is .781", the maximum height of cut is also fixed at .781". Every sprung moulding we design have height of cut numbers near the degree bevel on the layout papers we provide, that number must be smaller than the height number, in this equation .781" for this knife to be able to cut the entire back bevel while milling, if not please select a larger size height of the same degree.

We purposely layout all our sprung molding designs with forty-five-degree and under back cuts to mill on the right vertical cutter head, and all forty-five-degree and higher back bevels machined on the left vertical cutter head. This custom design practice will save thousands of dollars in manufacturing cost over the years, as well as saving time during machine setup procedures. Review our commentary about axial constant position for crown moulding bevels, the article will help you dial this profile in axially on the first try when milling any of our profiles, provided the machine is axially calibrated.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = 1.625" / Depth of Cut = .781" (right blades) & .781" (left cutters).

Molding Knife Calculator

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$40.00
$40.00
$40.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file”, please send $10.00 via PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.