Floor/Shoe Rail Moulding 3-1/2" - 4

This tall floor/shoe rail moulding 3-1/2" - 4 measures 3.500" wide by 4-3/8" tall. The large profile is comprised of a 1-3/4" wide by 3/8" deep dado on top for balusters or a balustrade, the sides consists of a two tangent radius arc, connected to a 3/16" wide slightly beveled horizontal line, joined to a 3-3/32" tall vertical line in the lower portion of the design.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process the knives will be capable of milling some of the finest quality architectural mouldings you have ever produced.

For knife quoting purposes use the calculator below, we have added only the important dimensions, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here.

Width = 3.500" / Depth of Cut = .375" (top knives).

Thickness = 4.375" / Depth of Cut = .920" (right blades) & .920" (left knives), only one templates is required to manufacturer the side blades.