Chair Rail Moulding 2-1/2" - 32

This custom colonial chair rail moulding 2-1/2" - 32 measures 2.500" wide by .750" thickness, allowing the detail to be machined out of four quarter lumber. The decorative profile is composed of a two tangent radius cyma recta with a 11/64" wide line segment on the top left, joined to a 3/8" radius semicircular arc tangent to a down-sloping angled line with a 11/64" concave curvature in the center, attached to a 3/32" wide line segment and a 13/32" wide half round bead, connected to a 1/8" wide flat line and a 15/64" cove with a 3/64" eased edge leaving a 3/16" thickness dimension on the right side of the design.

Be sure to check out a few other profile designs for different rooms in your beautiful home or office, our moulding catalog has over a fifteen thousand profiles to select from. Our eminence derives from over thirty-five years of experience and superior functionality of all our custom knife profiles.

Caution: the cutters will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic, or plastic sacrificial bed plate be used for these types of milling operations. For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.500" / Depth of Cut = .750" (top knives) & .062" (bottom cutters).