WM 81 Cove 3-1/4" - 4

This WM 81 cove mould 3-1/4" - 4 measures 3.250" in width by .563" in thickness. The asymmetrical terminating profile comprises a 3-1/2" radius cavetto in the center. It connects to a 17/32" tall vertical fillet on the top left and a 3/8" horizontal fillet at the bottom right corner of the pattern. The spring angles are fixed at forty-five degrees; these specific back bevels set the installed height at 2-3/8" tall with a projection of 2-7/32" across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 3-1/2" wide.

Review our commentary about axial constant positioning for crown bevels. The article will help you dial this profile in axially, provided the machine is adequately calibrated . Two high points in the pattern layout are deliberately positioned on the same plane. Our disciplined design features will assure excellent hold-down conditions while milling as long as the pressure shoe is parallel to the machine bed-plates.

The current combined high-speed knife steel & template prices are listed below for quoting purposes. You may only need knives for a specific cutter head on the itemized costs, saving money by employing knives you already own. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of profiles.