Cove Mould 5-3/4"

This beautifully large 5-3/4" cove mould comprises a 4-21/32" concave semicircle leaving a 5/16" thickness dimension in the center. It's flanked by a 19/32" vertical segment in the top left and a 19/32" flat area on the bottom right side of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 4-1/16" tall with a 4-1/16" projection across the top. The pattern measures 5.750" in width by 1.000" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 6.000" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.