Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 2-1/2" - 13

Crown Moulding 2-1/2" - 13

This Ovolo Crown Moulding 2-1/2" - 13 measures 2.500" wide by .750" thickness, with a .468" depth of cut on both the right and left sets of moulding cutters, and a .352" depth of cut on the top horizontal set of moulding knives.

The symmetrical profile is comprised of a 1-29/32" radius arc, connected to a 17/64" by 27/64" squared fillets on both the top and bottom of the pattern. The spring angles are set at forty-five degrees, search our bevels category by this degree to find a set of back bevel cutters appropriate for this ovolo crown moulding design, these specific cuts set the installed height and projection at an identical dimension of 1-49/64" tall and wide. Two high points in the detail were intentionally positioned on the same level plane, this design feature will assure excellent hold down conditions while milling the detail on an industrial moulder, providing the moulder pressure shoe is properly set parallel to the moulder bed plates.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm, with a twenty-five degree back clearance angle, will rough grind a set of high-speed steel moulding knives in a very minimal amount of time, purchase one today with your template order.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.