This Timeless Standard Crown Moulding 2-1/2" - 3 measures 2.500" wide by .750" thickness, with a .479" depth of cut on the right set of cutters, .579" depth of cut on the left set of blades, and a .369" depth of cut on the top horizontal moulding knives.
The time tested profile is comprised of two tangent radiuses creating a cyma recta in the center, attached to a 1/4" tall vertical fillet on top. The lower section consists of a 7/32" tall straight line, connected to a 21/64" radius cove with a 25/64" wide horizontal fillet on the bottom of the pattern . The spring angles are fixed at thirty-eight and fifty-two degrees, search our bevels category by these degree for a set of back bevel cutters appropriate for this common crown moulding design, these dedicated back bevels set the installed height at 1-7/8" tall with a projection of 1-11/16" wide.
Would you like to reduce the amount of time it takes to set up the moulder for a milling production run? Perhaps calibrating the moulder spindles axially and radially will substantially decrease setup time while simultaneously increasing production.
Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%