Crown 3-1/4" - 2

This shaker-style 3-1/4" - 3 crown mould measures 3.250" in width by .750" in thickness, requiring 3-1/2" wide blanks of four-quarter lumber for machining sprung (laying horizontally flat) on an industrial moulder. The symmetrical splay-faced terminating profile comprises a 2-3/16" broad angled line in the center. The canted line connects to a 3/8" wide by 3/8' tall perpendicular line on the top left and bottom right corners of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 2-19/64" tall with a 2-19/64" projection across the top.