Crown 3-1/4" - 32

This distinguished 3-1/4" - 32 crown mould measures 3.250" width by 1.000" thickness, requiring the use of a 3-1/2" wide blank of five-quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The beautiful supporting profile has two cascading convex semicircular arcs and a 7/64" vertical fillet on the top left. The short line connects to a 1-9/64" cove with a 1/8" round edge merged with an elongated 17/64" radius quarter round on the design's bottom right. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 2-9/16" tall with a projection of 2" across the top.