Crown 3-1/2" - 30

This mission style 3-1/2" - 30 crown mould measures .750" thickness, enabling the detail to be machined out of four-quarter lumber; the pattern is milled from both the right and left vertical cutter heads on the machinery; this allows the width to be made to any desired size. The symmetrical profile is composed of a 5/16" vertical line at the top and a 5/16" wide horizontal line at the bottom; joined by a 3-1/16" wide forty-five degree angled line in the center, this area will be different with any width alteration in the overall size. The spring angles are fixed at forty-five degrees. These specific back bevels set the installed height at 2-15/32" tall with a projection of 2-15/32" wide.