Crown 3-5/8" - 12

This opulent 3-5/8" - 12 crown mould measures 3.625" wide by 1.000" thickness, allowing the pattern to be milled sprung (laying horizontally flat) out of five-quarter lumber. The grandiose supporting profile is composed of a 31/64" convex arc joined to a 3/32" rounded corner on the top left, attached to a 9/32" vertical line merged with a beautiful two tangent radius elliptical shaped cove in the center, connected to a small beveled line and a teardrop shaped bead, merged with a 5/32" vertical fillet and a 5/32" cove with a 7/32" broad horizontal line segment on the bottom right side of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 2-9/16" tall with a projection of 2-9/16" wide.