Crown 3-23/32" - 2

This beautiful 3-23/32" - 2 terminating crown mould comprises a 3/16" tall by 5/32" wide perpendicular notch on the top left. It connects to a graceful cyma recta with a 3/16" high segment merged with a 5/8" by 3/4" cut out for rope or dentil mould in the center. The lower portion retains a small ogee flanked by 3/16" broad flat lines on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 2-5/8" tall with a 2-5/8" projection across the top. The pattern measures 3.712" in width by .813" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.