Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 4" - 23

Crown Moulding 4" - 23

This decorative crown moulding 4" - 23 measures 4.000" wide by .750" thickness. The ornate profile is comprised of a 3/64" tall vertical line on top, attached to a 11/64" notched fillet with a two tangent radius cyma recta in the center, connected to a small stepped line with a sunk fillet, joined to a half round bead and a 5/32" tall vertical line merged with a 13/32" wide horizontal line at the bottom of the pattern.

The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at an identical dimension of 2-13/16" tall and wide. Three high points in the detail were deliberately positioned on the same plane, our specialized design features will assure excellent hold down conditions while milling, providing the moulder pressure shoe is parallel to the machine bed plates.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 4.000" / Depth of Cut = .421" (top knives).

Thickness = .750" / Depth of Cut = .428" (right blades) & .428" (left cutters), the same template can be used to make both side knives.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.