Crown 4-5/16" - 2

This stylish 4-5/16" - 2 crown mould measures 4.312" wide by .938" thickness. The profile has similar design characteristics to the ever-popular Saroyan 3309 crown mould. It consists of a large 2-3/32" radius cove in the center flanked by a small vertical and horizontal fillet with two-quarter circles on top and an elliptically shaped quarter rounded arc on the bottom. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 3-7/16" tall with a 2-5/8" projection across the top. The pattern measures 4.313" in width by .938" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4-9/16" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.