Crown 4-1/2" - 9

This contemporary 4-1/2" - 9 shaker crown mould measures 4.508" width by .812" thickness, allowing the use of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial molder. The symmetrical terminating detail contains a 3/4" tall by 9/16" broad perpendicular lines on both the top and bottom of the design, the clean lines are connected by a 2-21/32" forty-five-degree beveled line in the center. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-3/16" tall with a projection of 3-3/16" across the top. We have a similar pattern in the same width but with different inner dimensions for your review & consideration, crown 4.500 - 21.