Crown 5-5/16" - 16

This intricate 5-3/16" - 16 crown mould measures 5.303" wide by 1.000" thickness. The ornate profile is packed with many geometrical shapes, such as cyma reversa, cyma recta, fillets, and notched areas on both the top and bottom of the design. A stepped fillet section for applying a small L-shaped dentil mould is in the middle of the pattern. When installed, the height becomes 3-23/32" tall, with a projection of 3-3/4" wide with the spring angles set at forty-five degrees. The crown points are located on the same plane for optimal hold-down conditions during milling.