Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 5-5/8" - 6

Crown Moulding 5-5/8" - 6

This Crown/Cove Moulding 5-5/8" - 6 measures 5.625" wide by .750" thickness with a depth of cut of .268" on the right vertical blades, .475" on the left vertical cutters, and a .504" depth of cut on the top horizontal set of moulding knives.

The notched cove profile is comprised of a 4-3/8" radius cove in the center, attached to a 1/2" tall by 13/32" wide notched fillet joined to a 11/16" tall vertical fillet in the upper portion of the pattern, the lower section consists of a 11/64" wide by 7/32"tall notched fillet, with a 1/2" wide horizontal line at the bottom of the detail. The spring angles are fixed at thirty-eight and fifty-two degree, search our bevels category by these degree to find two sets of back bevel cutters appropriate for this stylish crown/cove moulding design, these specific back bevels set the installed height at 4-7/16" tall with a projection of 3-7/16" wide. Four high points in the detail were intentionally positioned on the same level plane, this specialized design feature will assure excellent hold down conditions while milling the detail on an industrial moulder, providing the moulder pressure shoe is set parallel to the moulder bed plates.

Architects, interior designers, lumber mills, and moulding manufacturers have been utilizing our vast variety of creative moulding knife designs for years, we trust you will find that special moulding profile to enhance the architectural style of your home. If you have any questions or concerns about knife grinding procedures for any of our moulding designs, please contact us, we would be honored to assist you.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.