Crown 7-9/16" - 1

This elegantly large 7-9/16" - 1 crown mould measures 7.558" width by 1.250" thickness, requiring a 7-13/16" wide blank of six-quarter lumber for machining, sprung (lying horizontally flat) on an industrial moulder. The distinguished terminating profile composes a 23/64" vertical line joined to a 1/8" by 1/8" notch and a shallow ogee with a 5/16" tall half-circle on the upper left. The semicircle attaches to a shallow 5-3/4" cove in the center. The lower portion contains a teardrop-shaped bead merged with a set of elevation-changing perpendicular lines, and an elliptical-shaped concave semicircle with a 27/64" flat line on the design's bottom right corner. The spring angles are at 45 degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 5-5/16" tall with a 5-3/8" projection across the top.

Utilize any of our user-friendly molding profiles, all professionally designed by an accomplished draftsman/toolmaker with over forty years of experience in woodworking and a former Weinig field service technician. Our custom profiles reflect your imagination's creative style from just an idea in one's mind to reality in their beautiful home. Let us help you complement the architectural décor of any room with one or more of our attractive molding patterns.