Crown Moulding 8" - 16

This fashionable crown moulding 8" - 16 measures 8.014" wide by 1.000" thickness, permitting the pattern to be machined sprung (laying horizontally flat) out of five quarter lumber. The creative terminating profile is composed of a 1/2" vertical fillet on the top left, attached to a beautiful two tangent radius cyma recta in the center, joined to two 13/16" tall by 41/64" wide perpendicular lines and a 13/16" tall by 13/32" wide squared lines on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the inner section of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 6-5/16" tall with a projection of 4-15/16" wide.

Need this profile template and a set of moulding cutters quickly? We generally can have these cutters ground with any one of our premium quality high speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several different architectural eras, there are literally thousands of compelling designs to help match your creative style.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 8.000" / Depth of Cut = .484" (top knives).

Thickness = 1.000" / Depth of Cut = .552" (right blades) & .899" (left cutters).