Door Cope & Stick Molding 1-3/4" - 10

These beautiful door cope and stick moulding knives are capable of milling this ogee design on a door stile or rail measuring 1-3/4" thickness, there is .006" slop built into the joint area to allow glue to escape from during assembly. The tongue and groove portion (for the panel) dimensions are 1/2" wide by 1/2" deep, the ogee portion depth of cut is 3/4". Generally the stiles and rail are milled on a moulder, wider pieces that exceed the moulder's width limitations are more often milled on a shaper.