Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Face Frame Moulding 1-1/2" - 4

Face Frame Moulding 1-1/2" - 4

This cabinet face frame moulding 1-1/2" - 4 measures 1.500" wide by .813" thickness. The common profile is composed of a 1/4" wide half round circle on each side edge of the design, connected to a 1/16" wide by 5/32" deep sunk fillet with a 7/8" wide straight flat line in the center, the half round beads were intentionally recessed by .020" to allow for sanding after milling and assembly of the cabinet frame. We also offer a few other profiles with different inner dimensions for your review and consideration, face frame 1.500" - 5, door rail 1.500" - 14 and face frame 1.500" - 3.

Would you like to reduce the amount of time it takes to set up the moulder for a milling production run? Perhaps calibrating the moulder spindles axially and radially will substantially decrease setup time while simultaneously increasing production.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.500" / Depth of Cut = .301" (top knives.)

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.