Drawer Front Moulding 1-11/16"

This beaded drawer front moulding 1-11/16" measures 1.687" wide by .781" thickness, allowing the pattern to be machined out of four quarter lumber. The decorative profile is composed of a 1-1/16" wide by 5/32" tall raised fillet with a 3/32" eased outer edge on the top left, joined to two recessed (.063") 3/16" wide half round beads divided by two 1/8" wide sunk fillets above the dado for the panel on the right side of the design. We offer many door stile & rail designs that will complement this pattern, here is just one you may want to review and consider, door rail 2.250" - 3.

Did you ever wonder why some mouldings look and feel better than others in different homes, offices and other creative buildings? Please read our article on knife marks, learn how machine feed rates and rpm (revolutions per minute) of the cutter heads can directly affect the quality of your finished patterns. Following or exceeding industry standards will allow your company to lead the way in moulding artisanship.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.687" / Depth of Cut = .313" (top knives).