Cabinet Door Moulding 3" - 41

This cabinet door style & rail moulding 3" - 41 measures 3.000" wide by .812" thickness, permitting the pattern to be milled out of four quarter lumber. The lavish profile is comprised of a 1-3/4" wide flat line segment in the center, attached to a small vertical step joined to a 3/32" quarter round bead sunk fillet and a small cyma reversa on the top-left edge, the opposite side is composed of a 1/8" wide sunk fillet attached to a 1/4" half circle, merged to a 1/8" fillet with a 1/16" eased edge above the dado for the panel. We offer a matching drawer front profile of this detail for your review and consideration, door rail 2.000".

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability, knowledge, and experience to create visually stunning molding profiles that will complement the architectural decor of your elegant home or office.

For knife quoting purposes, click to open the calculator below; we supplied only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 3.000" / Depth of Cut = .375" (top knives).