This half-round 1-1/2" - 1 measures 1.500" wide by .625" thickness, with a .625" depth of cut on the top horizontal profile cutters. Caution, the knives will come within .020" of the machine bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these milling operations.

The arched profile is comprised of a 49/64" radius half round circle. This pattern is not intended for milling a bullnose detail; it has no blend area in the knife design because it is milled from the top cutter head. Search our bullnose 1.500" nosings, all these profiles mill from the right or left vertical cutterheads, they all have blend areas built into the blades so no one will notice where one knife begins and the other cutter ends.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel moulding cutters in a minimal amount of time. Read our article on the importance of having the profile knife grinder perfectly level this commentary will insure prolonged use of your machinery while maintaining consistent perfection when grinding knives.