3/8" Half Round - 1

This 3/8" half-round - 1 measure .375" wide by .250" thickness. The profile is comprised of a 3/16" radius half-round arc with 1/16" extended vertical fillets on each side of the pattern, with a 5/32" wide splitter in the middle.

As with every split moulding operation, we recommend installing an anti-kickback device on the machine before attempting to mill any of our multiple profiles. This detail is not intended to be used as a bullnose detail. It has no blend area in the knife design because it is milled from the top horizontal cutter head, search our bullnose .375" for nosings that mill from either the right or left vertical spindles, these patterns all have blend areas built into the cutters.

Our precise cad drawings contain plenty of information that will assist you during setup and milling of this profile. Caution; the knives will come within .015" of the machine bed plates, we suggest a sacrificial bed plate be used when milling this detail. For knife quoting purposes, use the calculator below; we have added only the important dimensions. A brief detailed explanation of how to use the calculator is located here.

Width = .906" / Depth of Cut = .255" (top knives).