Moulding Knives by Mirror Reflections

Moulding Knives
by Mirror Reflections
(801)451-5987

Search Our Moulding Knives Catalog by Category and Size

*Enter desired search sizes - use whole numbers & decimals

Handrail 2-5/16" - 6

Handrail 2-5/16" - 6

Handrail 2-5/16" - 6

This intriguing 2-5/16" - 6 handrail measures 2.312" width by 2.312" thickness, necessitating glued-up pieces of four, five, or six-quarter lumber for milling on a commercial-grade molder. The elegant profile contains a bidirectional 16.698-degree angled line with a 3/8" rounded point on the middle top. The symmetrical side consists of a 3/8" convex arc tangent to an 11/32" radius concave semicircle forming the finger grip area in the center, merged with a 1/8" tall vertical fillet with a 9/16" half circle on the lower sides. The bottom retains a 1-1/4" wide by 1/4" deep dado for baluster or balustrade leaving a 17/32" flat section on each side edge.

Ever notice why some moldings look better than other trim patterns in homes, offices, and older buildings? You may want to review our article on knife marks per inch. Read about how machine feed rates rpm's of cutter heads can directly determine the quality of your products. Following or exceeding industry standards will allow your company to lead the way in molding artisanship.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation of using the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.312" / Depth of Cut = .371" (top knives) & .250" (bottom cutters).

Thickness = 2.312" / Depth of Cut = .531" (right blades) & .531" (left cutters).

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file” , please send $11.00 to PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.
© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.
Superior Quality Moulding Knives, Profile Templates & Tooling Since1997
Custom made in the USAMoulding Knives Made in the USA

Moulding Knives by Mirror Reflections

1588 South 250 East | Kaysville, Utah 84037

Phone/Fax: 801-451-5987 

Moulding Catalog Updated Thursday, March 28, 2024

© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.