Nosing 1-1/4" - 3

This ornamental nosing 1-1/4" - 3 measures 1.250" wide by 1.000" thickness requiring five-quarter lumber to mill the detail on an industrial molder. The pattern is comprised of a 3/4" wide half-circle on top, attached to a 1/4" wide horizontal line in the center that joins to a 1/4" radius cove leaving a 3/8" thickness dimension on the thin side of the pattern. A 1/4" wide by 1/4" deep dado could be milled into the bottom side to allow the design to be used as a shelf edge or false stair tread moulding.

Custom-made elegance is a phrase used to define the beauty, style, and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability, knowledge, and experience to create profiles that will complement the architectural décor of your client's elegant home.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.250" / Depth of Cut = .625" (top knives).