Nosing 1-3/4" - 11

This designer shelf edge nosing 1-3/4" - 11 measures 1.750" wide by 1.000" thickness, allowing the detail to be machined out of five quarter lumber. The functional profile is composed of a one-inch wide bullnose top on the left, connected to a 3/8" wide line segment in the center merged with a 3/8" cove that transitions the thickness to 1/4" on the right side of the design.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural moldings you have ever produced.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.750" / Depth of Cut = .750" (top knives).