Panel Moulding 1" - 22

This Tiered Panel Moulding 1" - 22 measures 1.000" wide by .812" thickness with a .250" depth of cut on the left vertical blades and a .656" depth of cut on the top horizontal profile knives.

The stepped design is comprised of a 1/4" wide half-circle, attached to a 3/32" broad horizontal line with an eased edge, connected to three small stepped lines that transition into a 3/8" radius cove, leaving a 5/32" thickness dimension on the thin side of the pattern. The backside rabbet dimension is 1/4" wide by 1/2" tall, the height of the rabbet can be altered if needed with a simple axial adjustment on the vertical spindle during the milling process.

Our precise cad drawings contain plenty of important information that will assist you during setup and milling of this moulding profile. Our acrylic templates also provide good blend areas on the knives, so you will never realise where one moulding cutter begins or ends; this specific design feature will substantially increase moulding yield during the milling process.