Panel Moulding 2-1/4" - 10

This creative panel moulding 2-1/4" - 10 measures 2.250" wide by .750" thickness. The good looking profile is comprised of a 7/16" radius cove on the outer edge above the rabbet, connected to a 11/16" wide by 1/8" deep eased edge with a small vertical step, attached to a beveled line tangent off of a 3/32" radius cove and a 1/8" radius half round circle, joined to a small horizontal line with a 9/32" radius cavetto on the thin side of the pattern. The back side rabbet measures 5/16" wide by 5/16" tall, this is adjustable axially to any desired height during the milling process. We also have another pattern which is similar in shape to this one for your review and consideration, panel moulding 2.250" - 5.

Custom-made elegance is a phrase used to define the beauty, style and artisan-ship of thousands of our moulding profile designs. Weather you own a recently built house or older style residence, we have the ability, knowledge and experience to create moulding designs that will complement the architectural decor of your beautifully elegant home.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 2.250" / Depth of Cut = .625" (top knives).

Thickness = .750" / Depth of Cut = .312" (left cutters).