Panel Moulding 2-1/4" - 19

This distinctive panel moulding 2-1/4" - 1 measures 2.250" wide by 1.250" thickness, allowing the detail to be milled out of six quarter lumber. The elegant profile is composed of a 1/4" wide by 3/4" rabbet on the left, the top is comprised of a 1-1/8" wide semicircular arc in the center, flanked by a 7/64" wide line segment and a 3/16" cove on the left, the opposite side consists of a 3/64" wide line segment joined to a 5/16" cove merged with a 15/64" wide by 3/32" deep notch with a 3/16" cove on the right side of the design.

Weinig's light blue colored ceramic grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 2.250" / Depth of Cut = 1.074" (top knives.)

Thickness = 1.250" / Depth of Cut = .250" (left cutters.)