Panel Moulding 2-1/4" - 4

This canted panel moulding 2-1/4" - 4 measures 2.250" wide by .812" thickness, permitting the detail to be machined out of four quarter lumber. The beautiful profile is composed of a 5/8" wide by 1/8" tall raised fillet with 1/16" rounded edges, connected to a 3/16" wide flat line segment that joins to a 16.355 degree down-sloping beveled line, attached to a 1/8" wide by 1/8" tall perpendicular notch with a 3/64" eased edge, leaving a 3/16" thickness dimension on the right side of the design, the backside rabbet dimension is 1/4" wide by 5/8" tall.

Do you need any supplies for your moulder or tool room? Choose any of our quality high speed knife steel or premium carbide, we generally can ship these items the same day. We are also a Weinig authorized agent offering some of the highest quality cutter heads and tooling supplies for your moulder and knife grinding room.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.250" / Depth of Cut = .780" (top knives).

Thickness = .812" / Depth of Cut = .250" (left cutters).