Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Panel Moulding 9/16" - 2

Panel Moulding 9/16" - 2

This panel moulding 9/16" - 2 measures .562" wide by .500" thickness. The profile is comprised of a 5/16" wide half round circle, attached to a 3/32" wide by 7/64" deep stepped line, connected to a 7/64" quarter round circle on the thin edge of the design, the back side rabbet measures 1/4" wide by 9/32" tall. Utilize fall off rips of lumber while doubling production in half the amount of time with this unique split two custom panel mould design.

Caution; the cutters will come within .012" of the moulder bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For safety concerns we strongly suggest an anti-kickback device be installed on the machinery before attempting any milling procedures that involve splitting lumber into multiples pieces.

For knife quoting purposes use the calculator below, we have added only the important dimensions, just determine the profiles you need. A brief detailed explanation on how to use the calculator is located here.

Width = 1.280" / Depth of Cut = .508" (top knives).

Thickness = .500" / Depth of Cut = .250" (right blades) & .250" (left cutters), only one template is needed for the side blades.

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.