Plinth Block 6-1/2" - 1

This beveled plinth block 6-1/2" - 1 measure 6.500" wide by 1.750" thickness, necessitating the use of eight quarter lumber for milling on an industrial moulder. The simplistic profile is composed of a 2-1/4" wide flat line on the top left, attached to a 1/4" vertical drop in elevation merged with a 4-1/4" wide 6.71 degree angled line with a 3/64" eased edge that transitions the thickness to one inch on the right side of the detail. We also offer a smaller width size of this design for your review and consideration, plinth block 4-1/4" - 3.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural profiles you have ever produced.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 6.500" / Depth of Cut = .942" (top knives).