1/8" Radius Edge - 3

This double radius edge 1/8" - 3 measures 1.187" thickness, necessitating the use of six-quarter lumber for milling, the width can be machined to any desired size within the parameters of the moulder or shaper used to cut the pattern. The knives can mill two 1/8" round-overs on a single edge of a piece of lumber measuring 1-3/16" thickness. The acrylic template can be flipped over and referenced to either side of the profile knife grinder to manufacture a set of right or left blades for both vertical cutter heads on the machine; this will enable all four sides of the lumber to be milled simultaneously.

Are you having issues with lumber movement or sniping on the right vertical cutter head? Perhaps proper calibration of the rebate cutter (if you have one), or checking the knife to the fence alignment, will help solve the issue.

For knife quoting purposes use the calculator below; we have added only the important measurements; determine the cutters you need. A brief detailed explanation of using the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction-decimal-millimeter chart and place it on the moulder to help operators save time and increase accuracy during machine setup.

Thickness = 1.187" / Depth of Cut = .313" (right blades) & .313" (left knives).