No Message
Moulding Knives by Mirror Reflections

Moulding Knives
by Mirror Reflections

Search Our Moulding Catalog by Category and Size

*Enter desired search sizes - use whole numbers & decimals

3/8" Radius Edge Moulding - 10

3/8" Radius Edge Moulding - 10

3/8" Radius Edge Moulding - 10

This double radius edge moulding 3/8" - 10 measures 1.062" thickness, permitting the detail to be milled out of five quarter lumber, the width can be machined to any desired size within the parameters of the shaper or molder use to cut the pattern. The blades are capable of milling two 3/8" round-overs on one side edge of a piece of lumber measuring 1-1/16" thickness. The plastic template can be turned over and referenced to either side of the profile grinder to produce a set of right or left knives for both vertical cutter heads, this will allow all four sides to be milled simultaneously.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process the knives will be capable of milling some of the finest quality architectural mouldings you have ever produced.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = 1.062" / Depth of Cut = .531" (right blades) & .531" (left cutters.)

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file” , please send $11.00 to PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.
© Copyright 1997 - 2023 Mirror Reflections Inc. All Rights Reserved.
Superior Quality Moulding Knives, Profile Templates & Tooling Since1997
Custom made in the USAMoulding Knives Made in the USA

Moulding Knives by Mirror Reflections

1588 South 250 East | Kaysville, Utah 84037

Phone/Fax: 801-451-5987 

Moulding Catalog Updated Tuesday, March 21, 2023

© Copyright 1997 - 2023 Mirror Reflections Inc. All Rights Reserved.